ayoc
13th July 2009, 01:46 AM
SonicView Ihub Reset ROM0100
This Fixes Ver 82 Error.
SonicView Ihub Reset ROM0100
This Fixes Ver 82 Error
C/P
There are a few reasons why you would get v82 after loading ihub ver 1.4 with wizloader.
1: mismatch between DHCP and Static settings compared to what you have in ipconfig in your receiver. If you have static settings in ipconfig and use DHCP settings in wizloader you will get ver 82 instead of 1.4
2: mismatch between Use DNS box compared to what you have in ipconfig in the receiver. They must match. If you have Use DNS set to YES in ipconfig in receiver you must check that box in wizloader. If DNS set to NO in receiver then uncheck in wizloader before using Search in wizloader.
3: If you try loading the bin file for receiver with wizloader you also will get ver82 (which is error82). Load new bin for receiver with USB stick or null cable as you normally have in the past.
How To Fix ver 82 Error.
Open wizloader and do a search and match your settings the same as you have in ipconfig in receiver. IPConfig method DHCP or Static, Operation Mode Mixed, and set DNS according to what you have in ipconfig in the receiver.
Once all your settings are correct, Press the Search icon at the bottom of the wizloader program and when search is complete press teh close button in search window and see that your ihub info is in the program boxes. If it is, Click on the Upload icon and send the rom0100 file to the ihub. Once it is complete, send the 1.4 ihub file to the ihub. When your finished loading the 2 ihub files wait approxamately 2 minutes and click the search button in wizloader and make sure the version # is 1.4 if it is you have successfully repaired it and it is ready to use on your receiver. If the files don't take the first time, simply try again.
Hope this info is useful.
This Fixes Ver 82 Error.
SonicView Ihub Reset ROM0100
This Fixes Ver 82 Error
C/P
There are a few reasons why you would get v82 after loading ihub ver 1.4 with wizloader.
1: mismatch between DHCP and Static settings compared to what you have in ipconfig in your receiver. If you have static settings in ipconfig and use DHCP settings in wizloader you will get ver 82 instead of 1.4
2: mismatch between Use DNS box compared to what you have in ipconfig in the receiver. They must match. If you have Use DNS set to YES in ipconfig in receiver you must check that box in wizloader. If DNS set to NO in receiver then uncheck in wizloader before using Search in wizloader.
3: If you try loading the bin file for receiver with wizloader you also will get ver82 (which is error82). Load new bin for receiver with USB stick or null cable as you normally have in the past.
How To Fix ver 82 Error.
Open wizloader and do a search and match your settings the same as you have in ipconfig in receiver. IPConfig method DHCP or Static, Operation Mode Mixed, and set DNS according to what you have in ipconfig in the receiver.
Once all your settings are correct, Press the Search icon at the bottom of the wizloader program and when search is complete press teh close button in search window and see that your ihub info is in the program boxes. If it is, Click on the Upload icon and send the rom0100 file to the ihub. Once it is complete, send the 1.4 ihub file to the ihub. When your finished loading the 2 ihub files wait approxamately 2 minutes and click the search button in wizloader and make sure the version # is 1.4 if it is you have successfully repaired it and it is ready to use on your receiver. If the files don't take the first time, simply try again.
Hope this info is useful.